Heating Control
Question: What voltage should be across the RS485 terminals from Touch Screen to Gateway Answer: 0.1V to 1.2V DC (Intermittent or no communication)...
Tue, 10 Mar, 2020 at 4:54 PM
Overview ORC-HAGW-EXT-B ORC-HAGW-EXT-C Input Power 11V - 13V DC (250mA) 11V - 13V DC (200mA) Analogue inputs 8 in total on the top ...
Thu, 9 Mar, 2023 at 5:18 PM
This page will help assist on Heating and Cooling System: Door Entry: Standard ORC-7TF-WH installed flush Heating: Standard 2-10 ORC-HAGW-E...
Wed, 21 Dec, 2022 at 12:33 PM
ORC-HAGW-2 at Millbank has specific code to assist in installation environment. Web page current state is http://IPADDRESS/ergon/debug/ REG = this...
Mon, 24 Oct, 2022 at 9:59 PM
Millbank system is bespoke. Please follow below To manually check outputs from Extension module to UFH wiring centre: 12V DC should be constant at ...
Mon, 24 Oct, 2022 at 10:40 PM
This page will help assist on Heating and Cooling System: Door Entry: NOT orcomm Heating: UFH ORC-HAGW-LUMA Relay 230V for Actuators ...
Wed, 21 Dec, 2022 at 12:34 PM
Q: Which room thermostat controller do I have? A: Orcomm have many versions of ORC-HC2 controllers. To simplify we have reduced to a few options below. ...
Tue, 28 Mar, 2023 at 12:49 AM
DAMAC TOWER - Heating / Cooling The Orcomm touch screen is powered by PoE (#1). The Touch screen then communicates via ORCNET to the ORCOMM Gatewa...
Wed, 31 May, 2023 at 1:35 PM