Follow below to set IP static address through screen 


  1. Access Settings: Swipe down from the top of the idle screen to enter the control center or swipe left/right to the second idle screen, then tap the Settings icon (gear symbol).
  2. Navigate to Network Settings: Select Advanced Settings > Network > WAN Port.
  3. Enter Administrator Password: If prompted, enter the administrator password. The default password is "admin".
  4. Select IP Mode: Tap the IP Mode field and select IPv4 (or IPv4 & IPv6, depending on your network's addressing format).
  5. Select Static IP: Tap the IPv4 field (now visible below the IP Mode field) and select Static IP from the list.
  6. Enter Network Details:
    • Tap the IP Address field and use the on-screen keyboard to enter the desired static IP address.
    • Enter the Subnet Mask, Gateway, Primary DNS, and Secondary DNS values in their respective fields. (For the period character ".", you might need to tap the asterisk "*" on the keypad several times or use the on-screen keyboard if available).
  7. Save Settings: Tap Save to apply the changes.